|
Shandong Dageng Group Co.,Ltd
|
0.25mm LLDPE Geomembrane For Ponds , Linear Low Density Polyethylene
| Place of Origin: | Shandong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
0.25mm LLDPE Geomembrane For Ponds , Linear Low Density Polyethylene
<span
0.25mm LLDPE Geomembrane For Ponds , Linear Low Density Polyethylene
Description:
LLDPE is also an amorphous material increasing its stress crack resistance to certain chemical product. LLDPE is mainly used where long-term large settlements are anticipated such as landfill covers. However, its use also applies to a variety of other applications.
1) Can bear chemical erosion.
2) A wider using temperature range and a longer using life.
Applications:
1.Environmental protection, sanitation (such as landfill, waste water treatment, toxic and harmful chemicals
disposal sites, storage of dangerous goods , industrial waste, construction and demolition waste, ect.)
2.Water (such as impervious, stop water loss, and reinforcing of lakes, and the impervious, slope protection, ect.)
3.Municipal projects (underground subway, engineering underground and reservoirs on the roof, and the park
on the roof, the lining in the sewage pipes, ect.
4.Garden (artificial lakes, ponds, the lining of tank in golf course, slope protection, ect
5.Petrochemical(chemical plants, oil refineries, oil tank of fill stations , chemical reactions pound, the lining of
settling basin, second lining, ect.)
6.Mining( washing and selecting pool , heap pool, ashery, dissolving pool, settling basin ,stock dump, lining of
tailing pond, ect.)
7.Agriculture (reservoirs, drinking water tank, water storage pond, irrigation systems)
8.Aquaculture(fish ponds, the lining of breeding shrimp tank, slope protection of sea slug tank)
9.Salt industry (crystallization pond, thatch of salt pond, salt membrane, plastic thatch of salt pond)
Specifications:
|
Item |
Technical Data |
||||||
|
0.30 |
0.50 |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
|
|
Density(g/cm3) |
0.94+/-1 |
||||||
|
Yield Strength(≥N/mm) |
4 |
7 |
10 |
13.5 |
16 |
20 |
26 |
|
Break Strength(≥N/mm |
6 |
10 |
15 |
20 |
25 |
30 |
40 |
|
Yield Elongation(≥%) |
11 |
||||||
